These functions are declared in the main Allegro header file:

#include <allegro5/allegro.h>

Display creation

ALLEGRO_DISPLAY

typedef struct ALLEGRO_DISPLAY ALLEGRO_DISPLAY;

An opaque type representing an open display or window.

al_create_display

ALLEGRO_DISPLAY *al_create_display(int w, int h)

Create a display, or window, with the specified dimensions. The parameters of the display are determined by the last calls to al_set_new_display_*. Default parameters are used if none are set explicitly. Creating a new display will automatically make it the active one, with the backbuffer selected for drawing.

Returns NULL on error.

Each display has a distinct OpenGL rendering context associated with it. See al_set_target_bitmap for the discussion about rendering contexts.

al_destroy_display

void al_destroy_display(ALLEGRO_DISPLAY *display)

Destroy a display.

If the target bitmap of the calling thread is tied to the display, then it implies a call to "al_set_target_bitmap(NULL);" before the display is destroyed.

That special case notwithstanding, you should make sure no threads are currently targeting a bitmap which is tied to the display before you destroy it.

al_get_new_display_flags

int al_get_new_display_flags(void)

Get the display flags to be used when creating new displays on the calling thread.

al_set_new_display_flags

void al_set_new_display_flags(int flags)

Sets various flags to be used when creating new displays on the calling thread. flags is a bitfield containing any reasonable combination of the following:

ALLEGRO_WINDOWED

Prefer a windowed mode.

Under multi-head X (not XRandR/TwinView), the use of more than one adapter is impossible due to bugs in X and GLX. al_create_display will fail if more than one adapter is attempted to be used.

ALLEGRO_FULLSCREEN

Prefer a fullscreen mode.

Under X the use of more than one FULLSCREEN display when using multi-head X, or true Xinerama is not possible due to bugs in X and GLX, display creation will fail if more than one adapter is attempted to be used.

ALLEGRO_FULLSCREEN_WINDOW

Make the window span the entire screen. Unlike ALLEGRO_FULLSCREEN this will never attempt to modify the screen resolution. Instead the pixel dimensions of the created display will be the same as the desktop.

The passed width and height are only used if the window is switched out of fullscreen mode later but will be ignored initially.

Under Windows and X11 a fullscreen display created with this flag will behave differently from one created with the ALLEGRO_FULLSCREEN flag - even if the ALLEGRO_FULLSCREEN display is passed the desktop dimensions. The exact difference is platform dependent, but some things which may be different is how alt-tab works, how fast you can toggle between fullscreen/windowed mode or how additional monitors behave while your display is in fullscreen mode.

Additionally under X, the use of more than one adapter in multi-head mode or with true Xinerama enabled is impossible due to bugs in X/GLX, creation will fail if more than one adapter is attempted to be used.

ALLEGRO_RESIZABLE

The display is resizable (only applicable if combined with ALLEGRO_WINDOWED).

ALLEGRO_OPENGL

Require the driver to provide an initialized OpenGL context after returning successfully.

ALLEGRO_OPENGL_3_0

Require the driver to provide an initialized OpenGL context compatible with OpenGL version 3.0.

ALLEGRO_OPENGL_FORWARD_COMPATIBLE

If this flag is set, the OpenGL context created with ALLEGRO_OPENGL_3_0 will be forward compatible only, meaning that all of the OpenGL API declared deprecated in OpenGL 3.0 will not be supported. Currently, a display created with this flag will not be compatible with Allegro drawing routines; the display option ALLEGRO_COMPATIBLE_DISPLAY will be set to false.

ALLEGRO_DIRECT3D

Require the driver to do rendering with Direct3D and provide a Direct3D device.

ALLEGRO_FRAMELESS

Try to create a window without a frame (i.e. no border or titlebar). This usually does nothing for fullscreen modes, and even in windowed modes it depends on the underlying platform whether it is supported or not. Since: 5.0.7, 5.1.2

ALLEGRO_NOFRAME

Original name for ALLEGRO_FRAMELESS. This works with older versions of Allegro.

ALLEGRO_GENERATE_EXPOSE_EVENTS

Let the display generate expose events.

0 can be used for default values.

See also: al_set_new_display_option, al_get_display_option, [al_change_display_option]

al_get_new_display_option

int al_get_new_display_option(int option, int *importance)

Retrieve an extra display setting which was previously set with al_set_new_display_option.

al_set_new_display_option

void al_set_new_display_option(int option, int value, int importance)

Set an extra display option, to be used when creating new displays on the calling thread. Display options differ from display flags, and specify some details of the context to be created within the window itself. These mainly have no effect on Allegro itself, but you may want to specify them, for example if you want to use multisampling.

The 'importance' parameter can be either:

ALLEGRO_REQUIRE - The display will not be created if the setting can not be met.
ALLEGRO_SUGGEST - If the setting is not available, the display will be created anyway. FIXME: We need a way to query the settings back from a created display.
ALLEGRO_DONTCARE - If you added a display option with one of the above two settings before, it will be removed again. Else this does nothing.

The supported options are:

ALLEGRO_COLOR_SIZE: This can be used to ask for a specific bit depth. For example to force a 16-bit framebuffer set this to 16.
ALLEGRO_RED_SIZE, ALLEGRO_GREEN_SIZE, ALLEGRO_BLUE_SIZE, ALLEGRO_ALPHA_SIZE: Individual color component size in bits.
ALLEGRO_RED_SHIFT, ALLEGRO_GREEN_SHIFT, ALLEGRO_BLUE_SHIFT, ALLEGRO_ALPHA_SHIFT: Together with the previous settings these can be used to specify the exact pixel layout the display should use. Normally there is no reason to use these.
ALLEGRO_ACC_RED_SIZE, ALLEGRO_ACC_GREEN_SIZE, ALLEGRO_ACC_BLUE_SIZE, ALLEGRO_ACC_ALPHA_SIZE: This can be used to define the required accumulation buffer size.
ALLEGRO_STEREO: Whether the display is a stereo display.
ALLEGRO_AUX_BUFFERS: Number of auxiliary buffers the display should have.
ALLEGRO_DEPTH_SIZE: How many depth buffer (z-buffer) bits to use.
ALLEGRO_STENCIL_SIZE: How many bits to use for the stencil buffer.
ALLEGRO_SAMPLE_BUFFERS: Whether to use multisampling (1) or not (0).
ALLEGRO_SAMPLES: If the above is 1, the number of samples to use per pixel. Else 0.
ALLEGRO_RENDER_METHOD:: 0 if hardware acceleration is not used with this display.
ALLEGRO_FLOAT_COLOR: Whether to use floating point color components.
ALLEGRO_FLOAT_DEPTH: Whether to use a floating point depth buffer.
ALLEGRO_SINGLE_BUFFER: Whether the display uses a single buffer (1) or another update method (0).
ALLEGRO_SWAP_METHOD: If the above is 0, this is set to 1 to indicate the display is using a copying method to make the next buffer in the flip chain available, or to 2 to indicate a flipping or other method.
ALLEGRO_COMPATIBLE_DISPLAY: Indicates if Allegro's graphics functions can use this display. If you request a display not useable by Allegro, you can still use for example OpenGL to draw graphics.
ALLEGRO_UPDATE_DISPLAY_REGION: Set to 1 if the display is capable of updating just a region, and 0 if calling al_update_display_region is equivalent to al_flip_display.
ALLEGRO_VSYNC: Set to 1 to tell the driver to wait for vsync in al_flip_display, or to 2 to force vsync off. The default of 0 means that Allegro does not try to modify the vsync behavior so it may be on or off. Note that even in the case of 1 or 2 it is possible to override the vsync behavior in the graphics driver so you should not rely on it.
ALLEGRO_MAX_BITMAP_SIZE: When queried this returns the maximum size (width as well as height) a bitmap can have for this display. Calls to al_create_bitmap or al_load_bitmap for bitmaps larger than this size will fail. It does not apply to memory bitmaps which always can have arbitrary size (but are slow for drawing).
ALLEGRO_SUPPORT_NPOT_BITMAP: Set to 1 if textures used for bitmaps on this display can have a size which is not a power of two. This is mostly useful if you use Allegro to load textures as otherwise only power-of-two textures will be used internally as bitmap storage.
ALLEGRO_CAN_DRAW_INTO_BITMAP: Set to 1 if you can use al_set_target_bitmap on bitmaps of this display to draw into them. If this is not the case software emulation will be used when drawing into display bitmaps (which can be very slow).
ALLEGRO_SUPPORT_SEPARATE_ALPHA: This is set to 1 if the al_set_separate_blender function is supported. Otherwise the alpha parameters will be ignored.

al_reset_new_display_options

void al_reset_new_display_options(void)

This undoes any previous call to al_set_new_display_option on the calling thread.

al_get_new_window_position

void al_get_new_window_position(int *x, int *y)

Get the position where new non-fullscreen displays created by the calling thread will be placed.

al_set_new_window_position

void al_set_new_window_position(int x, int y)

Sets where the top left pixel of the client area of newly created windows (non-fullscreen) will be on screen, for displays created by the calling thread. Negative values allowed on some multihead systems.

To reset to the default behaviour, pass (INT_MAX, INT_MAX).

al_get_new_display_refresh_rate

int al_get_new_display_refresh_rate(void)

Get the requested refresh rate to be used when creating new displays on the calling thread.

al_set_new_display_refresh_rate

void al_set_new_display_refresh_rate(int refresh_rate)

Sets the refresh rate to use when creating new displays on the calling thread. If the refresh rate is not available, al_create_display will fail. A list of modes with refresh rates can be found with al_get_num_display_modes and al_get_display_mode.

The default setting is zero (don't care).

Display operations

al_get_display_event_source

ALLEGRO_EVENT_SOURCE *al_get_display_event_source(ALLEGRO_DISPLAY *display)

Retrieve the associated event source.

al_get_backbuffer

ALLEGRO_BITMAP *al_get_backbuffer(ALLEGRO_DISPLAY *display)

Return a special bitmap representing the back-buffer of the display.

Care should be taken when using the backbuffer bitmap (and its sub-bitmaps) as the source bitmap (e.g as the bitmap argument to al_draw_bitmap). Only untransformed operations are hardware accelerated. This consists of al_draw_bitmap and al_draw_bitmap_region when the current transformation is the identity. If the tranformation is not the identity, or some other drawing operation is used, the call will be routed through the memory bitmap routines, which are slow. If you need those operations to be accelerated, then first copy a region of the backbuffer into a temporary bitmap (via the al_draw_bitmap and al_draw_bitmap_region), and then use that temporary bitmap as the source bitmap.

al_flip_display

void al_flip_display(void)

Copies or updates the front and back buffers so that what has been drawn previously on the currently selected display becomes visible on screen. Pointers to the special back buffer bitmap remain valid and retain their semantics as the back buffer, although the contents may have changed.

Several display options change how this function behaves:

With ALLEGRO_SINGLE_BUFFER, no flipping is done. You still have to call this function to display graphics, depending on how the used graphics system works.
The ALLEGRO_SWAP_METHOD option may have additional information about what kind of operation is used internally to flip the front and back buffers.
If ALLEGRO_VSYNC is 1, this function will force waiting for vsync. If ALLEGRO_VSYNC is 2, this function will not wait for vsync. With many drivers the vsync behavior is controlled by the user and not the application, and ALLEGRO_VSYNC will not be set; in this case al_flip_display will wait for vsync depending on the settings set in the system's graphics preferences.

al_update_display_region

void al_update_display_region(int x, int y, int width, int height)

Does the same as al_flip_display, but tries to update only the specified region. With many drivers this is not possible, but for some it can improve performance.

The ALLEGRO_UPDATE_DISPLAY_REGION option (see al_get_display_option) will specify the behavior of this function in the display.

al_wait_for_vsync

bool al_wait_for_vsync(void)

Wait for the beginning of a vertical retrace. Some driver/card/monitor combinations may not be capable of this.

Note how al_flip_display usually already waits for the vertical retrace, so unless you are doing something special, there is no reason to call this function.

Returns false if not possible, true if successful.

Display size and position

al_get_display_width

int al_get_display_width(ALLEGRO_DISPLAY *display)

Gets the width of the display. This is like SCREEN_W in Allegro 4.x.

al_get_display_height

int al_get_display_height(ALLEGRO_DISPLAY *display)

Gets the height of the display. This is like SCREEN_H in Allegro 4.x.

al_resize_display

bool al_resize_display(ALLEGRO_DISPLAY *display, int width, int height)

Resize the display. Returns true on success, or false on error. This works on both fullscreen and windowed displays, regardless of the ALLEGRO_RESIZABLE flag.

Adjusts the clipping rectangle to the full size of the backbuffer.

al_acknowledge_resize

bool al_acknowledge_resize(ALLEGRO_DISPLAY *display)

When the user receives a resize event from a resizable display, if they wish the display to be resized they must call this function to let the graphics driver know that it can now resize the display. Returns true on success.

Adjusts the clipping rectangle to the full size of the backbuffer.

Note that a resize event may be outdated by the time you acknowledge it; there could be further resize events generated in the meantime.

al_get_window_position

void al_get_window_position(ALLEGRO_DISPLAY *display, int *x, int *y)

Gets the position of a non-fullscreen display.

al_set_window_position

void al_set_window_position(ALLEGRO_DISPLAY *display, int x, int y)

Sets the position on screen of a non-fullscreen display.

Display settings

al_get_display_flags

int al_get_display_flags(ALLEGRO_DISPLAY *display)

Gets the flags of the display.

In addition to the flags set for the display at creation time with al_set_new_display_flags it can also have the ALLEGRO_MINIMIZED flag set, indicating that the window is currently minimized. This flag is very platform-dependent as even a minimized application may still render a preview version so normally you should not care whether it is minimized or not.

al_set_display_flag

bool al_set_display_flag(ALLEGRO_DISPLAY *display, int flag, bool onoff)

Enable or disable one of the display flags. The flags are the same as for al_set_new_display_flags. The only flags that can be changed after creation are:

ALLEGRO_FULLSCREEN_WINDOW
ALLEGRO_FRAMELESS

Returns true if the driver supports toggling the specified flag else false. You can use al_get_display_flags to query whether the given display property actually changed.

Since: 5.0.7, 5.1.2

al_toggle_display_flag

bool al_toggle_display_flag(ALLEGRO_DISPLAY *display, int flag, bool onoff)

Deprecated synonym for al_set_display_flag.

al_get_display_option

int al_get_display_option(ALLEGRO_DISPLAY *display, int option)

Return an extra display setting of the display.

al_get_display_format

int al_get_display_format(ALLEGRO_DISPLAY *display)

Gets the pixel format of the display.

al_get_display_refresh_rate

int al_get_display_refresh_rate(ALLEGRO_DISPLAY *display)

Gets the refresh rate of the display.

al_set_window_title

void al_set_window_title(ALLEGRO_DISPLAY *display, const char *title)

Set the title on a display.

al_set_display_icon

void al_set_display_icon(ALLEGRO_DISPLAY *display, ALLEGRO_BITMAP *icon)

Changes the icon associated with the display (window). Same as al_set_display_icons with one icon.

al_set_display_icons

void al_set_display_icons(ALLEGRO_DISPLAY *display,
   int num_icons, ALLEGRO_BITMAP *icons[])

Changes the icons associated with the display (window). Multiple icons can be provided for use in different contexts, e.g. window frame, taskbar, alt-tab popup. The number of icons must be at least one.

Note: If the underlying OS requires an icon of a size not provided then one of the bitmaps will be scaled up or down to the required size. The choice of bitmap is implementation dependent.

Since: 5.0.9, 5.1.5

Screensaver

al_inhibit_screensaver

bool al_inhibit_screensaver(bool inhibit)

This function allows the user to stop the system screensaver from starting up if true is passed, or resets the system back to the default state (the state at program start) if false is passed. It returns true if the state was set successfully, otherwise false.

Allegro version 5.0.9 - Last updated: 2013-02-16 23:50:51 UTC

Displays